Skip to main content

Enabling / Disabling AES encryption

You can decide to encrypt a video during a Live operation, provided the destination server's license includes this option.

You can enable and disable the video AES encryption from the Unit Panel or the Web Interface.

Unit Panel

  1. From the Home menu, tap
    .
  2. Tap
    and select
    .
  3. Tap
    until the profile concerned is displayed.
  4. Tap the destination profile.
  5. Tap
    and select ADVANCED +.
  6. Tap
    to display the AES Encryption option.
  7. Tap
    to enable it, or
    to disable it. If enabled, enter the AES key as defined in the destination server interface (please refer to the Server User Guide).

Web Interface

  1. Click Settings > Destination.
  2. Click the Destination Profile where the video is sent to.
  3. Click Advanced.
  4. Click
    or
    to enable or disable the AES Encryption function. If enabled, enter the AES key as defined in the destination server interface (please refer to the Server User Guide).


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.