Press the wheel to enter the LIVE menu. The video preview appears on screen and the live profile selected is reminded. When turning the wheel, the LIVE menu provides some additional information.
Selected Live Profile Selected Record Profile Auto-record state (OFF/ON) The Selected Destination Profile
You can modify these settings before starting the Live action.
To select another Live profile:
Turn the wheel to highlight the Live profile ().
Press the wheel and turn to select the required profile.
Press the wheel to confirm the choice.
To select another Record profile:
Turn the wheel to highlight the Record profile ().
Press the wheel and turn to select the required profile.
Press the wheel to confirm the choice.
To modify the Auto-Record mode:
Turn the wheel to highlight the Auto-record option.
Press to enable () or disable () Auto-record.
Note
Simultaneous Live and Record in H.264 1080p50/59.94/60 is not supported.
To select another Destination profile:
Turn the wheel to highlight the Destination Profile ().
Press the wheel and turn to select the required profile.
Press the wheel to confirm the choice
Turn the wheel to highlight and press the wheel to start the live. The video preview appears on screen. Audio Bars indicating Audio Levels Live Duration
Turn the wheel to the left to display information about the Live action.
Network Bitrate Source Standard Live Duration End-to-End Latency configured in the Live Profile or modified remotely from StreamHub interface.
Note
Refer to the StreamHub User Guide to set another delay during Live operation.
In case of a live and simultaneous Record, a different screen appears:
Source Standard Record Duration Remaining recording time possible on SD card. Space used on SD card.
To stop the Live:
Turn the wheel to the right.
Press the wheel to stop the live.
Press the wheel to confirm..
To stop the Record:
Turn the wheel twice to the right.
Press the wheel to stop the record.
Press the wheel to confirm.
Web Interface
To start the Live:
Click to check that the unit settings are configured and selected as required:
Live profile
Auto-record mode (OFF / ON)
Record profile
Auto-forward option (OFF / ON)
Destination profile
Note
If you enable the Auto-record option, the video file is automatically recorded during the live.
Click to start the Live.
To stop the Live:
Click . A popup appears.
Click or the icon to stop the video transmission.
JavaScript errors detected
Please note, these errors can depend on your browser setup.
If this problem persists, please contact our support.