Skip to main content

Scanning for a Wireless Network

To scan for a wireless network from the Unit Panel, or from the Web Interface, see the sections below.

Unit Panel

  1. Use the wheel to select
    > WiFi > Mode > Client >
  2. Turn and press the wheel to select a network and enter a Password.
  3. Confirm by selecting
    and select
    to link the unit to the network.

Web Interface

  1. From the Web Interface, click
    on the Wi-Fi line.
  2. From the Mode scrolling list, select Client mode.
  3. Click on Apply
    Surrounded networks are scanned and listed.
  4. Select the network among the list.
  5. Enter the Password.
  6. Click on Join.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.