Manually Adding a Network

To manually add a network from the Unit Panel, or from the Web Interface, see the sections below.

Unit Panel

1. Use the wheel to select

   > WiFi > Mode > Client > vb.

2. Use the wheel to enter the Network name, select a Security Mode and enter a Password.

3. Turn the wheel to select and press it to connect the new network.

4. Turn the wheel to select and press it to save the new network.

Web Interface

1. From the Web Interface, click on the Wi-Fi line.

2. From the Mode scrolling list, select Client mode.

3. Click on Apply. 

4. Click on Add.

5. Enter the Network name, select a Security Mode and enter a Password.

6. Click on Join.