Skip to main content

Using a Genlock Input

Note

  • When no Genlock Input is selected and SDI 1 is selected for encoder 1, the Video Source for encoders 2, 3, and 4 is forced respectively to SDI2, SDI3, and SDI4 with no possibility to change.
  • The SYNC input supports SD Black Burst and HD Tri-level signals in the following formats: PAL, NTSC, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60. 

Unit Panel

  1. From the Home menu, tap
    .
  2. Tap
    .
  3. Tap on
    the Genlock Input field to select SYNC or any SDI input (if required).

Web Interface

  1. From the Web Interface, click Settings > I/O.
  2. In the Genlock Input field, select the input used for synchronizing the encoders (if required).
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close