You can start a live manually via the unit panel, web interface, or camera or you can enable the Auto-live at startup. See Enabling / Disabling Auto-Live at Startup.
Unit Panel
To start a live:
From the Home menu, tap . The video preview appears on screen and the live profile selected is displayed. When tapping or , the Live menu displays additional information for each encoder. Enable Encoder Selected Source Selected Live Profile Selected Destination Profile
Note
Video source must be all SDI or all Pattern.
All inputs must have the same resolution and the same frame rate.
You can modify settings before starting the Live action:
To select another Source:
Tap the field.
Tap another source.
To select another Live profile:
Tap the field.
Tap another Live profile.
To select another Destination profile:
Tap the field.
Tap another Destination profile.
Tap to start the Live for all encoders. Video previews appear on screen. Audio bars indicating audio levels Live icon blinking means that a live is running
Tap an encoder to display more information. Audio bars indicating audio levels Live duration
Tap to display some indications about the Live action: End-to-end Latency configured in the Live Profile or modified remotely from StreamHub interface Network bitrate Source standard Live duration
Note
See the StreamHub User Guide to set another delay during Live operation.
To stop the Live for all encoders:
Tap .
Tap .
Tap to confirm.
To stop the Live for a single encoder:
Tap the preview of the encoder that you want to stop.
Tap .
Tap .
Tap to confirm.
Web Interface
To start a live:
Click .
For each encoder, check that the settings are configured and selected as required:
Video Source
Live Profile
Destination Profile
Note
Video Source must be all SDI or all Pattern.
All inputs must have the same resolution and the same frame rate.