Skip to main content

Adding a Record Profile

To add a Record Profile from the Unit Panel, or from the Web Interface, see the sections below. 

Unit Panel

  1. From the Home menu, click on
    .
  2. Tap on
    and tap
    .
  3. Tap
    .
  4. Tap the Profile Name field.
  5. Use the keyboard to enter the new profile name.
  6. Tap
     to confirm.
  7. Tap the File Format field and select Transport Stream or MP4 format.
  8. Tap
    to configure the Record Profile settings:
    • Video Settings (Encoder Type, Bitrate). When recording, the video is encoded in CBR mode with a resolution as source.
    • Audio Settings (Encoder Type, Channel Layout, Bitrate)
  9. Tap
     to save the new Record Profile settings.

Web Interface

  1. Click Settings > Record.
  2. Click
    .
  3. Enter a profile name in the Profile Name field.
  4. Choose between Transport Stream and MP4 for the File Format.
  5. Choose the video Encoder Type.

    Note

    For RACK300 only.

  6. Set the video Bitrate.
  7. Select the audio Channel Layout.
  8. Set the total audio Bitrate.
  9. Click Apply.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.