Skip to main content

Setting Up a Second Stream or Recording

To create a second stream (or recording):
  1. On the Outputs List View, click the 
    Plus Icon
    Add button again.
  2. Follow the steps in Setting Up Streaming to configure the second session. Except for the Video Source, select a different Video Encoder. For example, if you selected Video Encoder 0 for the first stream, now select Video Encoder 2 (to capture input from SDI Input 2, as shown in the following example).
    Video Source Dropdown
  3. Also, under Streaming Parameters Destination, use a different Port number, for example, 2400.
  4. Follow Steps #1 through #3 from Setting Up Recording to create a recording session with the second session.
  5. Click Apply to start streaming (as well as recording, if configured).
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.