Skip to main content

Physical Characteristics

The table below describes some basic characteristics of the Makito XH appliance. For complete specifications, please refer to the data sheet available from the Haivision Web site.

Makito XH Encoder/Decoder
DimensionsChassis: 5.4” (13.72 cm) W x 8” (20.32 cm) D x 1.75” (4.45 cm) HStorage Temperature-10 °C to +7 °C
Material

Chassis: Aluminum 6061-T6

All materials are compliant with directive 2011/65/EU (RoHS2 / RoHS RECAST).

Working Temperature0 °C to +70 °C, no derating
Working Humidity0 to 95% non-condensing
WeightApproximately 4.0 lbs. (1.8 kg)Pressure300 to 1015 kPa
Finish

External: Black anodized, as per MIL-A-8625F, Type 2, Class 2

Internal: Chemical conversion as per MIL-DTL-5541F Type 2, Class 3

IP RatingIP42

Caution

We strongly recommend that you install the Makito XH and power adapter in an enclosure for protection against weather and other environmental stresses. The ambient temperature inside the enclosure should be between 0°C and 70°C, and the relative humidity between 5 and 95% (without condensation).

If you have specific questions regarding the suitability of the Makito XH in your operating environment, please contact Haivision Technical Support.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.