Logo Settings

The following table lists the Logo controls and settings:

Logo Setting	Default	Description/Values
Input	n/a	On the Makito X SDI dual channel, the video input is either BNC-1 or BNC-2. On the Makito X-DVI or SDI single channel, there is only one video input.
Position	Bottom Right	Select the position for the logo overlay: Bottom Right Top Right Bottom Left Top Left Centered Absolute Relative Note In Absolute mode, the logo will be positioned at the exact X and Y coordinates specified.
Coordinates	0, 0	Specifies the position of the logo on the X and Y axes. (The origin is the top left corner of the display area.) Note Only takes effect if Position is set to Absolute.
Transparency	0	Specifies the percentage of transparency for the logo: 0 = no transparency (i.e., a completely solid/opaque logo) 100 = fully transparent (i.e., a completely transparent/invisible logo)
Scaling	100	Specifies the scale factor (percentage) for the logo: 25% = 1/4 size 100% = no scaling 400% = 4x
Display	Disabled	Check this checkbox to display the selected file as a logo overlay.