Makito X Decoder Features
Makito X decoder features and benefits include the following:
General decoder features:
Unicast/Multicast Stream support
Still image insertion on loss of video stream
Output interface frame rate or resolution control for display matching for HDMI
A/V Sync Modes for clock recovery
Output Delay Buffer (0-2000 ms) Selection
KLV / SDI insertion (Licensable) (H.264 and HEVC)
CEA-708-B Closed Caption/SDI insertion with line control
AFD/SDI insertion with line control
SMPTE 12M ATC_VITC timecode/SDI insertion with insertion line control
Intra-Refresh support
High Efficiency Video Coding (HEVC/H.265) decoding of a single or dual stream:
Only available on HEVC-capable dual-height Makito X decoder
Supports interlaced or progressive streams and resolutions up to one channel of 1080p60 or two channels of 1080p30
Stream type is automatically determined on decoder startup
HEVC B-frame support (up to 4)
HEVC 4:2:2 or 4:2:0 and/or 8- or 10-bit encoded content
Multi-Track audio support (to inter-work with Makito X encoder v1.1 and later):
Up to eight audio decoders supported
MPEG-2 AAC-LC (ADTS) support
Support for two video decoders feeding two different SDI interfaces up to 1080p60
Ability to select which video stream is displayed on the HDMI interface up to 1920x1200p60 resolution
Visual notifications displayed on systems with unsaved configurations at login, logout, or reboot to warn users to save their current configuration as a preset
Redundant stream failover:
Each decoder channel can support an alternate stream as input which is switched to if the primary fails
Allows high availability applications to minimize down-time due to network connectivity faults
Support for the administrative features required to comply with the Common Criteria NDPP v1.1
Secure Reliable Transport (SRT) Streaming support
Field licensing (where applicable) of the video decoder instances, SRT and KLV