Makito X Decoder Features

Makito X decoder features and benefits include the following:

• General decoder features:
  • Unicast/Multicast Stream support
  • Still image insertion on loss of video stream
  • Output interface frame rate or resolution control for display matching for HDMI
  • A/V Sync Modes for clock recovery
  • Output Delay Buffer (0-2000 ms) Selection
  • KLV / SDI insertion (Licensable) (H.264 and HEVC)
  • CEA-708-B Closed Caption/SDI insertion with line control
  • AFD/SDI insertion with line control
  • SMPTE 12M ATC_VITC timecode/SDI insertion with insertion line control
  • Intra-Refresh support
• High Efficiency Video Coding (HEVC/H.265) decoding of a single or dual stream:
  
  • Only available on HEVC-capable dual-height Makito X decoder
  • Supports interlaced or progressive streams and resolutions up to one channel of 1080p60 or two channels of 1080p30
  • Stream type is automatically determined on decoder startup
  • HEVC B-frame support (up to 4)
  • HEVC 4:2:2 or 4:2:0 and/or 8- or 10-bit encoded content
• Multi-Track audio support (to inter-work with Makito X encoder v1.1 and later):
  
  • Up to eight audio decoders supported
  • MPEG-2 AAC-LC (ADTS) support
• Support for two video decoders feeding two different SDI interfaces up to 1080p60
• Ability to select which video stream is displayed on the HDMI interface up to 1920x1200p60 resolution
• Visual notifications displayed on systems with unsaved configurations at login, logout, or reboot to warn users to save their current configuration as a preset

• Redundant stream failover:

  • Each decoder channel can support an alternate stream as input which is switched to if the primary fails

  • Allows high availability applications to minimize down-time due to network connectivity faults

• Support for the administrative features required to comply with the Common Criteria NDPP v1.1
• Secure Reliable Transport (SRT) Streaming support
• Field licensing (where applicable) of the video decoder instances, SRT and KLV