Skip to main content

IPv6 Support

Version 2.3 introduced IPv6 support for Makito X encoders and decoders in addition to the existing IPv4 network support. Makito X devices now support IPv6-only networks as well as dual IPv4 and IPv6 network environments. You can install the Makito X on an IPv6 network or on a network supporting both IPv4 and IPv6. You will be able to access the Web Interface, CLI and SNMP via the IPv4 and/or IPv6 addresses assigned to the device. You will be able to perform normal administrative functions from the IPv4 and/or IPv6 addresses.

Version 2.3 IPv6 capabilities include the following:

  1. Static and dynamic assignment of IPv6 addresses via DHCPv6 or Stateless Autoconfiguration (SLAAC) to Makito X products in addition to the existing IPv4 capabilities.
  2. Dual-stack IPv4 and IPv6 may be used simultaneously for management and video streaming purposes.
  3. All administration functions may be performed from an IPv6 network client, including upgrade/downgrade, preset import/export, license install, system snapshots and specifying audit servers.
  4. User functions include creating and starting streams, specifying an NFS server for recording, specifying a Talkback device, capturing image snapshots, and importing logos and still image files from an IPv6 device.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.