Status Settings
The following table lists the Status settings. Status information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.
Status Setting | Description/Values |
|---|---|
Card Status | OK (or error message if applicable). |
Card Type | The type of device, e.g., Makito2 Dual-SDI Encoder or Makito2 Decoder. |
Part Number | The Haivision part number for the encoder or decoder, e.g., B-292E-HDSDI2 |
Serial Number | The serial number for this appliance or card. |
Firmware Version | The firmware version of the device, e.g., v2.2-47 |
Firmware Date | The firmware release date. |
Firmware Options | (If applicable) Firmware options installed, e.g., KLV-COT (Metadata Capture KLV & COT) or SRT. |
Hardware Version | The hardware version of the device. |
Hardware Compatibility | -001G (basic card assembly). |
| Mezzanine | (applicable hardware only) Indicates whether the mezzanine board is present. |
| Mezzanine Type | (applicable hardware only) The type of mezzanine board, e.g., HEVC Encoder. |
CPLD Version | The CPLD version of the device. |
Boot Version | The Boot version of the device. |
System Uptime | The length of time the encoder or decoder has been "up" and running (e.g., 1 day 03:42:03). |
Encoding Chipset Load | (Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams). |
| Temperature | The current board temperature in degrees Celsius. |