Makito X Decoder Features
Makito X decoder features and benefits include the following:
- General decoder features:
- Unicast/Multicast Stream support
- Still image insertion on loss of video stream
- Output interface frame rate or resolution control for display matching for HDMI
- A/V Sync Modes for clock recovery
- Output Delay Buffer (0-2000 ms) Selection
- KLV / SDI insertion (Licensable) (H.264 and HEVC)
- CEA-708-B Closed Caption/SDI insertion with line control
- AFD/SDI insertion with line control
- SMPTE 12M ATC_VITC timecode/SDI insertion with insertion line control
- Intra-Refresh support
- High Efficiency Video Coding (HEVC/H.265) decoding of a single or dual stream:
- Only available on HEVC-capable dual-height Makito X decoder
- Supports interlaced or progressive streams and resolutions up to one channel of 1080p60 or two channels of 1080p30
- Stream type is automatically determined on decoder startup
- HEVC B-frame support (up to 4)
- HEVC 4:2:2 or 4:2:0 and/or 8- or 10-bit encoded content
- Multi-Track audio support (to inter-work with Makito X encoder v1.1 and later):
- Up to eight audio decoders supported
- MPEG-2 AAC-LC (ADTS) support
- Support for two video decoders feeding two different SDI interfaces up to 1080p60
- Ability to select which video stream is displayed on the HDMI interface up to 1920x1200p60 resolution
- Visual notifications displayed on systems with unsaved configurations at login, logout, or reboot to warn users to save their current configuration as a preset
Redundant stream failover:
Each decoder channel can support an alternate stream as input which is switched to if the primary fails
Allows high availability applications to minimize down-time due to network connectivity faults
- Support for the administrative features required to comply with the Common Criteria NDPP v1.1
- Secure Reliable Transport (SRT) Streaming support
- Field licensing (where applicable) of the video decoder instances, SRT and KLV