ST 2110 Input Settings
The following table lists the ST 2110 Input essence controls and settings:
Essence:
Input Setting | Default | Description/Values |
|---|---|---|
Name | n/a | (Optional) A unique name for the media essence (up to 63 characters). |
| Media Type | Video | Select the media type for the media essence.
|
| Auto-Start | Enabled | (Only available when creating a new essence) Check this checkbox to automatically start the media essence when created. |
| Parameters | ||
| Address | n/a | The IP address of the media essence (in dotted-decimal format). This is typically a multicast address to which the ST 2110 data is being sent. |
| Port | n/a | The UDP port of the media essence. Enter a number in the range 1025..65,535. |
| RTP Payload | 96 (video) | The RTP Payload of the media essence. [0..127] |
| Source Address | Any | (Optional) The IP address of the media essence source for source-specific multicast. |
| Input | 1 | Select the input number for the media essence. This is used to assign the input to a video or audio encoder, or metadata source.
|
| Video | ||
| Video Format | Automatic | (Media Type must be Video) Select the format for the video essence.
|
| Audio | ||
| Number of Channels | 2 | (Media Type must be Audio) Enter the number of channels for the audio essence. 1 – 16 |
| Packet Time | 1ms | (Media Type must be Audio) Select the duration of packets for the audio essence, either:
|