Skip to main content

Makito X4 Rugged-Specific Specifications


Please refer to the Technical Specifications in the Makito X4 encoder User's Guide for general specifications. The following additional specifications apply only to the Makito X4 Rugged encoder. 

Makito X4 Rugged-Specific Specifications
Video Interfaces

Multiple-format Quad BNC Input:

  • 1 channel Rugged BNC video input supporting up to 12G-SDI or CVBS (Composite NTSC/PAL/PAL-M) analog video

  • 3 channel Rugged BNC video inputs supporting up to 3G-SDI or CVBS (Composite NTSC/PAL/PAL-M) analog video

Video Capture
  • Up to 3840x2160p60 (UHD) input resolution support (one encode core)
  • 4 x up to 1920x1080p60 input resolutions (4 encode cores)
  • 4 x up to 1080p30/720p60 input resolutions (8 encode cores).
  • CVBS capture on either three or all four BNC inputs. 


    As of Release 1.2, analog video input can co-exist with the SD/ED/HD/3G/6G/12G-SDI video input resolutions. The number of CVBS inputs supported depends on the Carrier Type. 

Audio Interfaces

Unbalanced Stereo Analog Audio Input

Embedded Audio:
  • HD/3D-SDI SMPTE 299M
Metadata InputKLV or CoT over serial RS-232/422
Metadata Processing

CTA-608 Line 21 Closed Captions
CTA-608/SDI and CTA-708/SDI Closed Captioning as per SMPTE 334-1/2

Standards Compliance
  • MIL-STD-810G
  • MIL-STD-461G
  • MIL-STD-1275E
  • MIL-STD-704F
  • RTCA-DO-160
Management InterfacesCommand line over SSH/Telnet/RS-232

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.