Skip to main content

Makito X4 Encoder User's Guide

This user’s guide explains how to configure and manage the Makito X4 encoder to stream audio, video, and metadata to a compatible decoding device, using either the Web interface, the Command Line Interface (CLI), or an SNMP server.

For information on installing and connecting to the Makito X4 appliance, please refer to the Makito X4 Encoder Quick Start Guide.

For the steps to install and configure the Makito X4 Rugged Encoder, refer to the Makito X4 Rugged Encoder Installation Guide.

For the steps to install and configure the Makito X4 Single Channel Encoder, refer to the Makito X4 Single Channel Encoder Installation Guide

Important

Before using the encoder, please familiarize yourself with the Safety Guidelines and Waste Electrical and Electronic Equipment (WEEE) Disposal notice.

Note

Unless otherwise specified, references to the "Makito X Series" can be taken to include the Makito X, Makito X4, Makito MX1, and Makito FX family of encoders and decoders. 


Guide Contents



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.