Skip to main content

Before You Begin

  1. Unpack the box and visually inspect the package contents for any evidence of shipping damage. See the Important Notice document in the box for a list of contents.
  2. In addition to the contents of the box, you may need to have the following items available:

    • Four #8-32 or M4 screws for mounting (not included)
    • A laptop with Web browser, Telnet client, and video player (e.g., VLC)
  3. To view the output from the encoder, make sure you have a decoding device or video player that supports the UDP Transport Stream format.

Caution

Before installing the device, please refer to "Safety Guidelines" (see link below). Only connect the unit to a compatible power source. If an electrical fault occurs, disconnect the unit and contact Haivision Technical Support. Never try to force the connections when setting up the system as this may damage the unit.

Caution

Hot surface. Avoid contact. The chassis can achieve a surface temperature 95°C in poorly ventilated environments, and may cause personal injury if touched.
ATTENTION Surface chaude. Eviter le contact. Le châssis peut atteindre une température de surface de 95°C dans des environnements mal ventilés et peut causer des blessures en cas de contact.

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.
AVERTISSEMENT Ce produit est destiné à être installé dans une zone d'accès restreint. Les zones d'accès restreint sont protégées par un mécanisme spécifique, par une serrure et une clé, ou par tout autre dispositif de sécurité.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.