Command Summary and Access Control

The Makito X4 decoder CLI commands are divided in two main groups: operation and administration:

Operation Commands are used to manage video decoding. Operation command effects are immediate but not persistent (i.e., between reboots) unless the current operating configuration is explicitly saved (using the config command).
Administration Commands address the security and network configuration. Their effects are persistent but not always immediate; some require system reboot to take effect.

Below is a list of CLI commands and other functionalities supported by the system, the privileges for each role, and their descriptions.

Operation Commands

Command	Role			Description
	Admin	Operator	Guest
cpuinfo	Yes	Yes	Yes	Display the current Up Time and CPU/Memory status.
dec	Yes	Yes	"`get`" only	Manage A/V decoder settings.
essence	Yes	Yes	"get" only	Manage ST 2110 media essences.
leds	Yes	Yes	"`get`" only	Display current LED status and initiate blinking of Status LEDs on the Makito X4 face-plate in order to help locate the device.
mkstill	Yes	Yes	No	Generate still images from a picture.
still	Yes	Yes	"`list`" only	Manage still image files on the Makito X4 file system.
stream	Yes	Yes	"`get`" only	Create and manage streams to map decoder inputs to output interfaces.
temperature	Yes	Yes	Yes	Display the current temperature of the unit.

Administration Commands

Command	Role			Description
	Admin	Operator	Guest
Network and Management
config	Yes	Yes	"`list`" only	Manage configurations on the Makito X4.
date	Yes	Yes	Yes	Display the current date.
emspair	Yes	No	No	Pair and unpair the Makito X4 with a Haivision EMS (Element Management System).
ethercfg	Yes	No	No	View, manually control, and save the Ethernet configuration parameters.
haiversion	Yes	Yes	Yes	Display the Firmware Build ID, Build Time, and serial number for the Makito X4.
ipconfig	Yes	No	No	Set and view the parameters that specify the networking context for the Makito X4, including the IPv4 settings, hostname, and DNS.
ipv6config	Yes	No	No	Set and view the IPv6 settings.
license	Yes	No	No	Manage licensed features.
nmcfg	Yes	No	No	Configures SNMP by reading and editing the standard SNMP configuration files, and then restarting the SNMP agent (`snmpd`) to apply the new settings.
nmos	Yes	Yes	"`get`" only	View and manage NMOS configuration.
package (for upgrade)	Yes	No	No	View and manage software packages, including firmware upgrades.
passwd	Yes	"`operator`" password only	"`user`" password only	Change the password for a user account.
personality	Yes	No	No	Switch the decoder personality between SDI and 2110.
ptp	Yes	"`get`" only	"`get`" only	Manage SMPTE ST 2110 Precision Time Protocol parameters.
reboot	Yes	No	No	Halt and restart the Makito X4.
service	Yes	No	No	Enable and disable network services, including HTTP, passthrough, snmp, ssh, talkback, telnet, and vf.
Security Commands
account	Yes	No	No	Manage user accounts for the decoder.
audit	Yes	No	No	Enable remote logging of security and administrative events and configure the remote audit (`syslog`) server connection.
banner	Yes	No	No	Manage the Advisory Notice and Consent Banner.
certificate	Yes	No	No	Manage TLS certificates for the Web interface HTTPS server and the secured TLS connection to the remote audit server.
messages	Yes	No	No	View and manage administrative login messages.
policy	Yes	No	No	Manage security policy settings.
pubkey	Yes	Yes	Yes	Manage the user's own authorized SSH public keys.

Access

Command	Role
	Admin	Operator	Guest
Web access	Yes	Yes	Yes
Telnet to/from decoder	Yes	Yes	Yes

Other/Utilities

Command	Role			Description
	Admin	Operator	Guest
iperf	Yes	Yes	Yes	Measure and tune network performance.
ping	Yes	Yes	Yes	Send packets to network hosts to test a network connection.
tcpdump	Yes	No	No	Display TCP/IP and other packets being transmitted or received over a network interface.
traceroute	Yes	Yes	Yes	Display the route (path) and measure transit delays of packets across an IP network.

For an overview of system access control on the Makito X4 decoder, see Role-based Authorization.