Skip to main content

Single-Height Appliance

Single Blade Appliance (#S/B-MX4D-SDI4)
Dimensions (H x W x D)

21mm H x 129mm W x 196mm D

(0.83” H x 5.1” W x 7.7” D)

Weight

Appliance (no PSU): Approximately 1.14 kg (2.5 lbs.)

Blade with heat sink: Approximately 240 gm (0.529 lbs)

Power Requirements

12 VDC Nominal, 18W (each blade)

100-240VAC 30W external power supply

Note

IEC 60601-1 Class I and II power supplies are available from Haivision.

Power Connector

On unit: Conxall p/n 17282-3PG-300

Mating connector: Conxall p/n 16282-3SG-318

Temperature**

Operating: 0°C to 40°C (32°F to 104°F)

Non-operating*: -30°C to 70°C (-22°F to 158°F)

*Limited by the power supply storage: -30°C
**Ambient environmental temperature

Relative Humidity

Up to 95% without condensation

Heat

20 Watts or 68.3 BTU/hr

Sound Emission

41.2 dB(A) L'p(AVG)

Compatible with Haivision MB6X and MB21X multi-blade chassis.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.