Services Settings

HTTP

Hypertext Transfer Protocol, used for Web browsers acting as a client.

Note

Only secured HTTP (HTTPS) is supported.

SSH

Secure Shell, a network protocol that allows data to be exchanged using a secure channel between two networked devices.

Telnet

Telnet, a network protocol used on the Internet or local area networks to provide bidirectional communications via a virtual terminal connection.

SNMP

Simple Network Management Protocol, a network protocol used mostly in network management systems to monitor network attached devices.

EMS

EMS (Element Management System) allows simple management of Haivision-only devices such as Haivision EMS and Haivision Hub 360. 
Possible connection statuses for the EMS service are:

For more on pairing to EMS, see Pairing the Encoder with Haivision EMS.

For more on pairing to Hub 360, see Adding an Appliance in the Hub 360 documentation.

Product Analytics

Toggle Enable Anonymous Product Analytics on or off to enable or disable the collection of anonymous product analytics.

Thumbnail Preview

Preview Thumbnails provide a visual reference of each video encoder’s input. By default, previews are enabled and set to 10 second intervals.

Serial Pass-Through

(Makito X Series Rugged Encoders only) Bi-directional serial pass-through for controlling serially attached devices such as PTZ controlled cameras. Both RS-232 and RS422 are supported.

Note

The COM Port Mode must first be set to Pass-Through.

Port

(Serial Pass-Through must be enabled) Specifies the TCP port that the Makito X will listen on for remote commands.

RTSP

Enables streaming of video feeds from the Makito X encoder to a Milestone server for archiving and analysis using the RTSP protocol.

ONVIF

Enables the ONVIF management API to send commands from  the Milestone XProtect video management software (VMS) to the Makito X encoder .