Skip to main content

Supported Video Encoding Input and Downscale Resolutions

Encoded Output ResolutionsInput Resolutions and Frame Rates
1920x1080p1920x1080i1280x720p720x480i720x576i
NameResolution60/
59.94
503029.97252423.9830/
29.97
2560/
59.94
5030/
29.97
2530/
29.97
25
HD 1080p1920x1080p112222211111111
HD 1080i1920x1080i-------22----11
3/4 HD 1080p1440x1080p111111111------
3/4 HD 1080i1440x1080i-------11------
1/2 HD 1080p960x1080p111111111------
1/2 HD 1080i960x1080i-------11------
HD 7201280x720p111111111222211
3/4 HD 720960x720p---------1111--
1/2 HD 720640x720p---------1111--
SD 480p720x480p1-11-111-1-1-1-
SD 480i720x480i-------1-----2-
SD 576p720x576p-1--11--1-1-1-2
SD 576i720x576i--------1------
4CIFp704x576p--------------1
4CIFi704x576i--------------1
3/4 D1 NTSCp540x480p1-11-111-1-1-1-
3/4 D1 NTSCi540x480i-------1-----1-
3/4 D1 PALp540x576p-1--11--1-1-1-1
3/4 D1 PALi540x576i--------1-----1
70% VGA448x336p111111111111111
Half-D1 NTSCp352x480i/p1-11-111-1-1-1-
Half-D1 NTSCi352x480i/i-------1-----1-
Half-D1 PALp352x576i/p-1--11--1-1-1-1
Half-D1 PALi352x576i/i--------1-----1
CIFp352x288i/p111111111111111
CIFi352x288i/i-------11----11


Legend:

2Up to 2 encoding cores/instances supported
1Only a single encoding core/instance supported

Note

Resolutions marked "-" are not supported.

Only video encoder 0 can scale or deinterlace video. Video encoder 1 can encode at the native resolution if the aggregate (total) encoding does not surpass 1080p60. For example:

  • A 1080p60 SDI signal is ingested into MX1 on encoder 0 and then downscaled to 720p60.
  • In this case, video encoder 1 can encode the 1080p60 resolution but must frame-decimate to 1080p30 to avoid oversubscribing the aggregate encoding capacity of the MX1.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.