Status Settings
The following table lists the System settings. System information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.
System Setting | Description/Values |
|---|---|
| Device Name | The name of your Makito X1 device, which is displayed in the browser tab. To change the device name, type in a new name and click Apply. |
Card Status | OK (or error message if applicable). |
Card Type | The type of device, e.g., MakitoX1 SDI Rugged Encoder. |
Part Number | The Haivision part number for the encoder or decoder, e.g., S-MX1E-R. |
Serial Number | The serial number for this appliance or card. |
Firmware Version | The firmware version of the device, e.g., 1.0.0-23. |
Firmware Date | The firmware release date. |
Hardware Version | The hardware version of the device. |
Hardware Compatibility | -001G. |
CPLD Version | The Complex Programmable Logic Device (CPLD) version. |
System Uptime | The length of time the encoder or decoder has been "up" and running (e.g., 4 days 17:42:03). |
Encoding Chipset Load | (Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams). |
| Temperature | The current board temperature in degrees Celsius. |