Skip to main content

Services Settings

The configurable Services are as follows:

Network Services

Service

Description/Values

HTTP

Hypertext Transfer Protocol, used for Web browsers acting as a client.

Note

Only secured HTTP (HTTPS) is supported.

SSH

Secure Shell, a network protocol that allows data to be exchanged using a secure channel between two networked devices.

Telnet

Telnet, a network protocol used on the Internet or local area networks to provide bidirectional communications via a virtual terminal connection.

SNMP

Simple Network Management Protocol, a network protocol used mostly in network management systems to monitor network attached devices.

Haivision EMSEMS (Element Management System) allows simple management of Haivision-only devices. 
Product AnalyticsToggle Enable Anonymous Product Analytics on or off to enable or disable the collection of anonymous product analytics.
Thumbnail PreviewPreview Thumbnails provide a visual reference of each video encoder’s input. By default, previews are enabled and set to 10 second intervals.

Encoder-only

Service

Description/Values

Serial Pass-Through

(Makito X Series Rugged Encoders only) Bi-directional serial pass-through for controlling serially attached devices such as PTZ controlled cameras. Both RS-232 and RS422 are supported.

Note

The COM Port Mode must first be set to Pass-Through.

Port

(Serial Pass-Through must be enabled) Specifies the TCP port that the Makito X will listen on for remote commands.

RTSPEnables streaming of video feeds from the Makito X encoder to a Milestone server for archiving and analysis using the RTSP protocol.
ONVIFEnables the ONVIF management API to send commands from  the Milestone XProtect video management software (VMS) to the Makito X encoder .

Related Topics

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.