Command Summary and Access Control

The Makito X1 CLI commands are divided in two main groups: operation and administration:

Operation Commands are used to manage the Audio/Video data path, processing, and features, including audio/video/metadata content selection, audio/video encoding, H.264 and HEVC streaming. Operation command effects are immediate but not persistent (i.e., between reboots) unless the current operating configuration is explicitly saved (using the config command).
Administration Commands address the security and network configuration. Their effects are persistent but not always immediate; some require system reboot to take effect.

Note

A warning appears when you sign in or out of a Makito X1, or reboot, when the current configuration has not been saved in a preset. See config.

Expand the sections below to view the CLI commands and other functionalities supported by the system, the privileges for each role, and their descriptions.

Operation Commands

Command	Role			Description
	Admin	Operator	Guest
General
audenc	Yes	Yes	"get" only	Manage encoder audio acquisition settings, including starting and stopping encoding of the audio input.
leds	Yes	Yes	"get" only	Control the behavior of the Status LED (on the Makito X1 face-plate) at startup.
metadata	Yes	Yes	"get" only	Manage metadata sources to capture metadata (either KLV or CoT) and then incorporate data information within the MPEG Transport Stream.
passthrough	Yes	Yes	"get" only	On encoders with a serial port, enable bi-directional serial passthrough for controlling serially attached devices.
rtsp	Yes	Yes	"get" only	Manage rtsp settings.
session	Yes	Yes	"get" only	Manage SAP multicast advertising sessions.
stream	Yes	Yes	"get" only	Create and manage audio/video streams.
temperature	Yes	Yes	Yes	Display the current temperature of the unit.
videnc	Yes	Yes	"get" only	Manage video encoding parameters, including starting and stopping encoding of the video input.
vidin	Yes	Yes	"get" only	View and manage video input settings.

Administration Commands

Command	Role			Description
	Admin	Operator	Guest
Network and Management
config	Yes	Yes	"list" only	Manage configurations on the Makito X.
date	Yes	Yes	Yes	Display the current date.
dtconfig	Yes	—	—	Set the date and time on the encoder.
emspair	Yes	—	—	Pair and unpair the Makito X with/from a Haivision EMS (Element Management System).
ethercfg	Yes	—	—	View, manually control, and save the Ethernet configuration parameters.
haiversion	Yes	Yes	Yes	Display the Firmware Build ID, Build Time, and serial number for the Makito X.
ipconfig	Yes	—	—	View and set the parameters that specify the networking context for the Makito X, including the IP settings, hostname, and DNS.
ipv6config	Yes	—	—	View and set the parameters that specify the IPv6 network configuration.
license	Yes	—	—	Manage licensed features.
nmcfg	Yes	—	—	Used by system administrators or GUI/Web interface applications in the configuration of SNMP for the Makito X.
package	Yes	—	—	View and manage software packages, including firmware upgrades.
passwd	Yes	operator password only	user password only	Change the password for a user account.
reboot	Yes	—	—	Halt and restart the Makito X.
service	Yes	—	—	Enable and disable network services, including HTTP, SNMP, SSH, and Telnet.
system_snapshot.sh	Yes	Yes	Yes	Take a system snapshot for the purpose of troubleshooting, which may be forwarded to Haivision Technical Support if you are requesting technical support.
tzconfig	Yes	—	—	Configure the timezone on the encoder.
Security
account	Yes	—	—	Use to manage user accounts for the encoder.
audit	Yes	—	—	Use to enable remote logging of security and administrative events and configure the remote audit (syslog) server connection.
banner	Yes	—	—	Use to manage the Advisory Notice and Consent Banner.
certificate	Yes	—	—	Use to manage the TLS certificates for the Web interface HTTPS server and the secured TLS connection to the remote audit server.
messages	Yes	—	—	Use to view and manage administrative login messages.
policy	Yes	—	—	Use to manage security policy settings.
pubkey	Yes	Yes	Yes	Use to manage the user's own authorized SSH public keys.

Access

Command	Role
	Admin	Operator	Guest
Web access	Yes	Yes	Yes
Telnet to/from encoder	Yes	Yes	Yes
Serial access to encoder	Yes	Yes	Yes

Other/Utilities

Command	Role			Description
	Admin	Operator	Guest
iperf	Yes	Yes	Yes	Measure and tune network performance.
ping	Yes	Yes	Yes	Send packets to network hosts to test a network connection.
tcpdump	Yes	—	—	Display TCP/IP and other packets being transmitted or received over a network interface.
traceroute	Yes	Yes	Yes	Display the route (path) and measure transit delays of packets across an IP network.

For an overview of system access control on the Makito X1, see Role-based Authorization.