Video Encoder Statistics
The following table lists the Video Encoder statistics (some only available when State is ENCODING):
Video Encoder Statistic | Description/Values |
|---|---|
ID | The encoder's ID number: 0 or 1. |
State | The current operating status of the encoder, either:
|
Up Time | The length of time the encoder is actively encoding (e.g., 1d22h5m41s). |
Input Present | Indicates whether an input signal has been detected from the video source: Yes / No |
Input Type | (only available when State is ENCODING) The video input in use for the encoder: HDMI or SDI. |
Input Format | The input signal detected from the video source. |
HDCP | (HMDI only) The encoder's HDCP status: On / Off |
HDCP Authenticated | (HMDI only) The encoder's HDCP status with authentication: On / Off |
Encrypted | (HMDI only) The encoder's HDCP status with encryption: On / Off |
Input Aspect Ratio | The aspect ratio of the video source. |
Input Color Primaries | (SDI only) Indicates the chromaticity coordinates of the source primaries as specified in terms of the CIE 1931 definition of x and y. e.g., BT.709, BT.601(625), BT.601(525), BT.2100 |
Input Transfer Characteristics | (SDI only) Indicates the reference opto-electronic transfer function (OETF) of the source picture, or indicates the inverse of the reference electro-optical transfer function (EOTF) of an output linear optical intensity. e.g., BT.709, BT.601, BT.2100(PQ), BT.2100(HLG) |
Input Matrix Coefficients | (SDI only) Describes the matrix coefficients used in deriving luma and chroma signals from the green, blue, and red. e.g., BT.709 BT.601, BT.2100(NCL Y'CbCr) |
Output Resolution | The stream output resolution. |
Encoded Frames | Number of encoded frames. |
Encoded Bytes | Number of encoded bytes. |
Encoded Frame Rate | The video frame rate per second. |
Number of Slices | The number of slices per frame being generated by the encoder. The range is 1 (default) up to 11. |
Dropped Frames | Number of dropped frames. |
Encoder Resets | Number of encoder resets. |
Encoded Bitrate | The video bitrate used for the encoder (in kbps). |
Encoder PTS | The current encoder Presentation Time Stamp (PTS) based on a 90 kHz clock: e.g., 0x138a56483 |
Encoder Load | The video encoding processor usage of the stream instance in percentage (%). |
Scaler Load | Percentage of FPGA scaler capability being used by a given encoder. |
Closed Captioning | Indicates whether Closed Captioning (CC) is Enabled or Disabled on the output Stream. |
Extracted CC Bytes | (CC must be enabled) Number of extracted Closed Captioning Bytes. |
CC Errors | (CC must be enabled) Number of Closed Captioning errors. |
Extracted CSD Bytes | (CC must be enabled) Number of extracted Caption Service Descriptor Bytes. Tip CSDs define signaling and announcement of caption services. |
Timecode Source | (Timecoding must be enabled) The selected timecode source. |
Timecode | The timecode for the encoded video frame. Or the system time if user has chosen “system” for the TimeCode Source displayed as (HH:MM:SS:FF) Hours, Minutes, Seconds and Frames. |
H.264 or H.265 Profile | The application profile class for the encoder, either:
|
H.265 Tier | The application tier for the encoder, as defined by the HEVC standard, either Main or High. The Main tier is a lower tier than the High and was designed for most applications. The High tier was designed for very demanding applications (in terms of their maximum bit rate). |
H.264 or H.265 Level | The required level of decoder performance to be able to process the video incoming stream: e.g., 3, 3.2, 4, or 4.2 |
Reset | Click to reset the Video Encoder statistics. |
Related Topics