Skip to main content

Setting Up the Encoder

Note

For information on installing and connecting to the Makito FX appliance, please refer to the Makito FX Encoder Quick Start Guide.

Always read the instructions carefully and keep this user's guide for future reference.

Please choose a suitable location for operating the encoder(s). By doing so you will preserve the operating life span and stability of the unit(s).

Set up the Makito FX encoder on a flat and reliable surface, or mount on a rack using the rack-mount brackets.

Safety First

Please pay particular attention to the following points in order to help protect yourself and the encoder:

  • The Makito FX is a a fanless appliance that uses its enclosure for heat dissipation; it can reach high temperatures. Be sure to handle the appliance accordingly, for instance, do not leave anything resting on the enclosure.
  • There are no user-serviceable parts inside the unit. Making unauthorized changes will void the warranty.
  • Only connect the unit to a compatible power source. 
  • If an electrical fault occurs, disconnect the unit and contact Haivision Technical Support.
  • Never try to force the connections when setting up the system as this may damage the unit.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.