Skip to main content

Kraken Edge Quick Start Guide

Note

The Kraken Edge is still supported by Haivision, but is no longer for sale.  
For users looking for a similar product, see the Kraken Edge Rev B. The Edge Rev B maintains similar features to the original Kraken Edge, with enhanced hardware capabilities. 

This Quick Start Guide provides the steps required to install and connect to your Kraken Edge Media or Transcoding appliance.

For detailed Kraken configuration and operation information, please refer to the User's Guide.

For the default credentials, refer to the Important Notice (postcard shipped with the appliance). You may download the Important Notice as well as the latest software and Release Notes through the Download Center on the Haivision Support Portal.


Guide Contents



Safety Guidelines

Use the following guidelines when unsafe conditions exist or when potentially hazardous voltages are present:

  • Always use caution and common sense.
  • To reduce the risk of electrical shock, do not operate equipment with the cover removed.
  • Repairs must be performed by qualified service personnel only.

Improper handling and/or installation practices of sensitive equipment may VOID the warranty.

Caution

When handling components, or when setting switch options, always use an antistatic wrist strap connected to a grounded equipment frame or chassis. If a wrist strap is not available, periodically touch an unpainted metal surface on the equipment. Never use a conductive tool, such as a screwdriver or a paper clip, to set switches.

ATTENTION Lors de la manipulation de composants ou lors du réglage des options de commutateur, utilisez toujours un bracelet antistatique connecté à un cadre ou un châssis d'équipement relié à la terre. Si aucun bracelet n'est disponible, touchez périodiquement une surface métallique non peinte de l'équipement. N'utilisez jamais d'outil conducteur, tel qu'un tournevis ou un trombone, pour régler les commutateurs ou interrupteurs.

Waste Electrical and Electronic Equipment (WEEE) Disposal

WEEE Symbol

In accordance with the European Union (EU) WEEE Directive, Haivision products that fall within the scope of the WEEE, are labeled with the above symbol, and customers are encouraged to responsibly recycle their equipment at the time of disposal. Haivision also offers its customers the option of returning Haivision equipment to facilitate its environmentally sound disposal.

For more information, please visit our website at: https://www.haivision.com/environment.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.