Upgrading an Appliance

Currently, Makito and transmitter (Air, Pro, Rack) appliances can be upgraded directly from Haivision Hub 360.

Note

Prior to upgrading, ensure the device is not streaming or a Live is not underway.

To upgrade the firmware on these devices:

1. Click Appliances in the sidebar.
2. Click the 

   

    icon next to the appliance you wish to upgrade and note the current version number.
   

3. Click the

   

    icon next to the appliance you wish to upgrade and click Update Firmware.
   
   

   Tip

   You may upgrade multiple appliances at the same time by checking the checkboxes next to each appliance and clicking the Update Firmware button. The selected appliances must be of the same type and model for the Update Firmware button to be enabled.

   

4. In the dialog box that opens, select the desired firmware file from the dropdown.

   

   Note

   Ensure that you select a newer version than the current version number noted in step #2.

   

5. Click the Next button.
6. Confirm the upgrade by clicking the Update Firmware button.
7. For Air, Pro, and Rack devices, additional steps are needed:
   1. The upgrade must be confirmed in the transmitter web interface. Access the interface by clicking on the link given in the status message:
      

      

   2. In the Transmitter UI, click the Yes button to confirm the update.
      

      

   3. When the installation completes, you must reboot the transmitter. Click the 

      

       icon and click Reboot.
      

      

Note

The upgrade process takes several minutes and the appliance will reboot.