Start Re-streaming a Recording

This command creates a stream for the specified recording (asset) and returns its ID. You specify the destination IP address and port.

Authorizations: All

startRestreamRecording recordingId ip port

Name	Description
recordingId	The ID of a HMP recording.
ip	The destination unicast or multicast IP address.
port	The destination Port number.

Success

streamId

Error

Error	Description
ERROR\|010001\|'Y' is not a UUID	The `recordingId` provided must be a UUID.
ERROR\|010001\|'Y' is not an ip address	The IP Address must follow the IPv4 dotted decimal notation.
ERROR\|010001\|'Y' is not a port number	Port must be between 0 and 65535.
ERROR\|040002\|Recording not found	A recording with UUID `'recordingId'` was not found.
ERROR\|010005\|Only single source recordings can be streamed	`recordingId` is a UUID of a multi-sourced session.
ERROR\|010006\|Address or port already in use	The specified IP address or port is currently in use by the session.
ERROR\|010006\|Address or port already in use by a source	The specified IP address or port is currently in use by the source.
ERROR\|070004\|Error while starting stream	An internal error occurred while starting the `restream`. Please see `calypso.log` for details.

startRestreamRecording f678f415-0665-48cd-b141-1e95283469f1 
 10.65.10.240 222

OK|bfdac49c-beb7-4271-8acb-de79f3fd2ddf