Skip to main content

Accessing the Web Interface

To access the device's Web interface:

  1. On another computer connected to the same network, open a Web browser.
  2. Enter the device's assigned IP address. For example, if the IP Address is 10.5.1.4, enter a URL of https://10.5.1.4.
  3. When a browser accesses the website, it requests a security certificate to confirm that the site is trusted.
    The device ships with a self-signed SSL certificate key set which works with any configured server hostname. However, Web browsers do not consider self-signed certificates to be trusted, because they are not signed by a Certificate Authority. Consequently, when accessing the website with a self-signed certificate, users see a security warning and are prompted for authorization as shown below. Responses may vary depending upon the browser used.

    Important

    Before proceeding or adding an exception for the site, check with your administrator on the correct response.

  4. Sign in using one of the credentials provided on the Important Notice included with your device.

When you first sign in, the EMS Web interface opens to the main screen (as shown in the following example). From here, you can pair and manage devices.

EMS Main Screen

For configuration and operation information, please refer to the User's Guide.

For configuration and operation information, please refer to the User's Guide.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.