Skip to main content

Transmitting Files via the Hot Folder


The Hot Folder function enables you to transmit files (e.g., photos) automatically over unmanaged networks wherever the action is taking place. This function uses an FTP push to transmit files following the FIFO method (First In, First Out). You can enable or disable the function as required.


Note

  • You can manage the hot folder content on the SD card as you wish.
  • Please refer to the procedure about deleting files in (v3.5) Deleting Files from the SD Card.
  • Files can be transmitted according to 2 priority levels (standard or priority), as defined on the device that transmits files.


To enable / disable the hot folder function:


Unit Panel
  1. From the Home menu, tap
    .
  2. Tap
    and select
    .
  3. Tap
    to enable or
    to disable the Hot Folder option.
Web Interface
  1. Click Settings > Forward.
  2. Click

    or
    to toggle between enabling and disabling the Hot Folder function.

After enabling the Hot Folder function, the

icon appears in the upper bar. Files are automatically forwarded following the priority levels defined on the camera (standard or high priority). When the file transmission starts, the forward action can be seen on screen.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.