From the Home menu, click on . The video preview appears on screen and the live profile selected is reminded. When clicking on or , the Live menu provides some additional information.
Selected Live Profile Selected Record Profile Auto-record is enabled or not (OFF/ON) The Selected Destination Profile
You can modify these settings before starting the Live action.
To select another Live profile:
Click on the field.
Click on another Live profile.
To select another Record profile:
Click on the field.
Click on another Record profile.
To modify the Auto-Record mode:
Click on the or button option to toggle the setting.
To select another Destination profile:
Click on the field.
Click on a different Destination profile.
From the Home menu, click on . The video preview appears on screen and the live profile selected is reminded. When clicking on or , the Live menu provides some additional information. Audio Bars indicating Audio Levels Live Duration
Click on to display information about the Live action. Network Bitrate Source Standard Live Duration End-to-End Latency configured in the Live Profile or modified remotely from StreamHub interface.
Note
Refer to the StreamHub User Guide to set another delay during Live operation.
In case of a Live and simultaneous Record, a different screen appears: Source Standard Record Duration Remaining recording time possible on SD card. Space used on SD card.
To stop the Live:
Click on .
Click on .
Click on to confirm.
To stop the Record:
Click on .
Click on .
Click on to confirm.
Note
Simultaneous Live and Record in H.264 1080p50/59.94/60 is not supported.
Web Interface
To start the Live:
Click to check that the unit settings are configured and selected as required:
Live profile
Auto-record mode (OFF / ON)
Record profile
Auto-forward option (OFF / ON)
Destination profile
Note
If you enable the Auto-record option, the video file is automatically recorded during the live.