Skip to main content

Manually Adding a Network

To manually add a network from the Unit Panel, or from the Web Interface, see the sections below.

Unit Panel
  1. From the Home menu, click on
    > WiFi > Mode > Client >
    .
  2. Click on
    to add a new network.
  3. Enter a Network name, select a Security Mode and enter a Password.
  4. Enter the network password.
    • Click on
      to connect the network.
    • Click on
      to save the new network.
Web Interface
  1. From the Web Interface, click
    on the Wi-Fi line.
  2. From the Mode scrolling list, select Client mode.
  3. Click on Apply. 
  4. Click on Add.
  5. Enter the Network name, select a Security Mode and enter a Password.
  6. Click on Join.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close