Adding a Destination Profile

To add a destination Profile from the Unit Panel, or from the Web Interface, see the sections below.

Unit Panel

From the Home menu, tap > > .
Tap
to configure the new destination profile settings (see Destination Profile Settings for details on each destination type).
Tap to save the new destination profile settings

Web Interface

Click on Settings > Destination.
Click the button.
Enter a Name for the Profile.
Select the type of Destination Profile (StreamHub, Manager, or SRT Receiver).
Configure the settings as shown in the table below in Destination Profile Settings.
Click on Apply.

To select the newly created Destination Profile, see Selecting a Destination Profile.

Destination Profile Settings

Note

These settings may have been changed by the system administrator.
Auto-connect option is selected to connect automatically to a receiver when the unit is powered.

StreamHub	Manager	SRT Receiver
StreamHub IP address or Hostname Input assignment on the StreamHub (Automatic Assignment possible) Auto-connect function (Enabling/Disabling) Port used. Default: 7900 Username. Default: aviwest Password. Default: safestreams AES key if required	Manager IP address or Hostname Auto-connect function (Enabling/Disabling) Port used. Default: 9000 Username. Default: username Password (if required). Default: password	SRT mode (Caller or Listener) Host SRT port Ethernet port Latency SRT Encryption (and passphrase if enabled) Stream ID (in Caller mode only)